Servicing & Maintenance of Fire Alarm

Fire Projects provide maintenance and AMC contract for fire alarm system. Fire Alarm System is central component of any fire protection installation and it deserves the highest level of care and maintenance achievable. The prevalent trend is for property owners to outsource this technically demanding task. However, the highly competitive environment and the expectation of unrealistically low prices by property owners often prevented maintenance contractors from delivering the expected  level of service. As a result, the level of care and maintenance delivered may deteriorate to an extent that compromises the integrity of the system, thereby compromising the safety of occupants and property.

This slideshow requires JavaScript.

In case of fire incidence timely and orderly evacuation is very crucial factor and fire alarm system detects fire on early basis. Fire alarm system gives notification of the fire existence and evacuation can start on immediate basis.

Fire Projects suggest and offer following work classification for maintenance program:

  1. Planned maintenance:

A. Time-based maintenance:

Determine condition of detection system and prevents failure by systematic inspection and monitoring undertaken at predetermined time intervals. During this maintenance fire projects checks fire alarm control panel, power supply and battery back-up of fire alarm control panel, detectors (smoke detector, heat detector, and flame detector), signalling devices (MCP, Hooter, Sounder strobe), cable and connection and current.

B. Condition-based maintenance:

During this maintenance fire projects perform corrective maintenance work which result in make entire system condition into normal mode and system become fully functional.

C. Statutory maintenance:

This kind of maintenance can be done to meet mandatory requirement and to comply statutory norms. In case of requirement fire projects do statutory maintenance.

  1. Unplanned maintenance:

A. Routine breakdown and maintenance:

This kind of work performed in unplanned and reactive maintenance action to restore the full functionality of fire alarm system and its component as result of an unforeseen failure.

B. Incident maintenance:

In case of fire incident, damage, lighting strike, vandalism and other accidents this kind of unplanned maintenance can be carried out to restore the full functionality of fire alarm system and its component.

According to BS5839 part 1, Fire Projects always recommend preventive maintenance, which time-based maintenance. It ensure critical life safety functions performed by fire alarm system all the time. As per BS5839 part 1, at following frequency time-based preventive maintenance should be done.

A. Daily:

Check the control panel to ascertain that it shows normal operation. Otherwise log the failure and ensure that any fault reported the previous day has received attention.

B. Weekly:

Ensure that the system is capable of operating under alarm conditions by operating at least one detector or call point on one circuit (zone or loop). Visually inspect backup batteries, check fuel, oil and coolant levels of any standby generators, if any.

C. Monthly:

Simulate mains failure to automatically start standby generator to power the fire alarm system for at least 1 hour. Check for malfunctions. Restore to normal supply and check generator start up battery & charger.

D. Quarterly:

Check entries to log book and ensure that necessary actions are taken. Examine batteries and their connections and test them as specified by supplier to ensure that it is not likely to fail before the next quarterly inspection. Check Alarm functions of the panel by operating a detector or call point in each zone. Check Alarm sounders and automatic link to remote centres, if any. Check all ancillary functions of the control panel, where possible. Check all fault indicators and circuits by simulating a fault condition. Visually inspect the control panel for signs of moisture ingress or other deterioration. Visually inspect whether structural or occupancy changes have affected the requirements for the sitting of call points, detectors and sounders.

E. Annually:

Check each detector for correct operation in accordance to manufacturer’s recommendation. Visually check all cable fittings and equipment are secure, undamaged and adequately protected. Record any defects in a logbook and upon completion, a certificate of testing is issued to the responsible person.

Fire Projects – Fire Alarm Servicing does all kind of planned and unplanned maintenance irrespective of whether it is time based, condition based, statutory,  routine breakdown or incident maintenance. To get offer for maintenance of system kindly connect on: or email:

One thought on “Servicing & Maintenance of Fire Alarm

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s